# You are Browsing Combinational Circuit News

by E-Computer Concepts 3 months ago

## BIOS and CMOS

BIOS (basic input output system) and CMOS (complementary metal-oxide-semiconductor) both are essential parts of every computer’s motherboard. Let us have a look at BIOS and CMOS for their different tasks. BIOS Full Form is Basic Input...

by E-Computer Concepts 11 months ago

## Multiplexer and Demultiplexer

What is Multiplexer ? Multiplexer is a combinational circuit that has 2n input lines and one of these inputs goes to single output lines. To select one from given 2n inputs, we have n selection lines. A multiplexer with 2n input lines...

by E-Computer Concepts 11 months ago

## Encoder and Decoder

What is Encoder? An Encoder is a device that is used to change a signal (such as bitstream) or data into a code. The code may serve any of a number of purposes such as compressing information for transmission or storage, encrypting...

by E-Computer Concepts 11 months ago

## Subtractors

Subtraction can be done using various methods like direct subtraction of the corresponding bits or using complement’s methods as has already been discussed. If we use complement’s methods, subtraction is done using addition...

by E-Computer Concepts 11 months ago

Full Adder is used to add three bits, i.e., when we also have a carry from the lower significant bit addition. Now, there will be three number of inputs and two outputs. Input variables are A, B which are the two bits that are to be added...

by E-Computer Concepts 11 months ago

## What is Half Adder ?

For designing a half adder, we will follow steps described follows – As we know that half adder is used to add two bits, from the statement of the problem it is clear that we have to add two bits in binary.As two bits have to...

by E-Computer Concepts 11 months ago

Adding two numbers is one of the basic tasks performed by a computer. Addition operation of two binary digits can be represented as follows – For all values of A and B except 11, the result is a single digit value but for...

by E-Computer Concepts 11 months ago

## Designing of Combinational Circuit

To Design a combinational circuit, we have to follow following steps— The Problem should be clearly stated.Determine what are the input and output variables.Assign letter symbols to both input and output variables.Derive a truth...

by E-Computer Concepts 11 months ago

## Logical Circuits

Logical Circuits for digital systems can be two types – Combinational Circuits and Sequential circuits. Main difference between the two is that in combinational circuits, the output of the circuit at any time is determined by the...